Nylon materials prepared through ring-opening polymerization or condensation polymerization using raw materials obtained via bioengineering methods are collectively referred to as ​bio-based nylon materials. Common bio-based nylon materials include nylon 11, nylon 1010, nylon 610, nylon 510, nylon 410, and nylon 1012, among others.

PA510 is a renewable and environmentally friendly bio-based nylon, polymerized from sebacic acid and decamethylenediamine derived from castor oil, with a bio-based content exceeding 60%. It is a high-performance nylon independently developed and pioneered in China.

Bio-based nylon PA610, derived from renewable resources such as castor oil, is widely used in engineering plastics due to its excellent mechanical properties, sustainability, and versatility. Below is an introduction to eight commonly used bio-based nylon PA610 engineering plastics, including their modifications and applications

Nylon, derived from non-renewable petroleum resources, is manufactured through energy-intensive processes that require significant amounts of water for fiber cooling. It has a high carbon footprint, sheds microplastic fibers during washing, and is often landfilled at the end of its life cycle, as it is typically non-biodegradable. These factors contribute to substantial negative environmental impacts.

ABS resin is the most produced and widely used polymer, which organically integrates the various properties of PB, PAN, and PS, exhibiting excellent mechanical properties with a balanced combination of toughness, hardness, and rigidity. ABS is a terpolymer of acrylonitrile, butadiene, and styrene, where A represents acrylonitrile, B represents butadiene, and S represents styrene. Practical use has revealed that ABS plastic pipes are not resistant to sulfuric acid corrosion and will shatter upon contact with sulfuric acid.

ABS plastic is a ternary copolymer composed of acrylonitrile (A), butadiene (B), and styrene (S).

Polymer materials have good flexibility, which can avoid deformation and damage to the vehicle body caused by impact。

Zero-C® Bio-based Polyamide is a bio-based engineering plastic developed by Yanmei Advanced Materials, primarily sourced from renewable plant extracts.